NPort 5600-DTL Series

Features and Benefits

  • 8 serial ports supporting RS-232/422/485
  • Compact desktop design
  • 10/100M auto-sensing Ethernet
  • Configure by Telnet, web browser, or Windows utility
  • Supports Real COM and TCP server, TCP client, UDP socket modes
  • SNMP MIB-II for network management

Certifications

Download Datasheet

Introduction
NPort® 5600-8-DTL device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with basic configurations. You can both centralize management of your serial devices and distribute management hosts over the network. The NPort® 5600-8-DTL device servers have a smaller form factor than our 19-inch models, making them a great choice for applications that need additional serial ports when mounting rails are not available.

Convenient Design for RS-485 Applications
The NPort® 5650-8-DTL device servers support selectable 1 kilo-ohm and 150 kilo-ohms pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort® 5600-8-DTL device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.

LED Indicators to Ease Your Maintenance Tasks
The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort® 5600’s LEDs not only indicate current system and network status, but they also help field engineers monitor the status of attached serial devices.

Appearance

Specifications

Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector) 1
Magnetic Isolation Protection 1.5 kV (built-in)
Ethernet Software Features
Configuration Options Serial Console, Telnet Console, Web Console (HTTP/HTTPS), Windows Utility
Management ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, Rtelnet, SMTP, SNMPv1/v2c, TCP/IP, Telnet, UDP
Filter IGMP v1/v2
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Linux Real TTY Drivers Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
Fixed TTY Drivers SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Android API Android 3.1.x and later
MIB RFC1213, RFC1317
Time Management SNTP
Serial Inteface
Connector DB9 male
No. of Ports 8
Serial Standard NPort 5610-8-DTL Series: RS-232
NPort 5650-8-DTL Series: RS-232/422/485
Baudrate Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS, DTR/DSR, XON/XOFF
Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms
RS-485 Data Direction Control ADDC® (automatic data direction control)
Terminator for RS-485 NPort 5650 Series: 120 ohms
Isolation NPort 5650I-8-DTL Series: 2 kV
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Power Parameters
Input Current NPort 5610-8-DTL Series: 340 mA @ 12 VDC
NPort 5650-8-DTL Series: 470 mA @ 12 VDC
NPort 5650I-8-DTL Series: 740 mA @ 12 VDC
Input Voltage 12 to 48 VDC
No. of Power Inputs 1
Reverse Polarity Protection Supported
Source of Input Power Power input jack
Reliability
Automatic Reboot Trigger Built-in WDT
Alert Tools Built-in buzzer and RTC (real-time clock)
Physical Characteristics
Housing Metal
Dimensions (with ears) 229 x 135.43 x 46 mm (9.02 x 5.33 x 1.81 in)
Dimensions (without ears) 197 x 135.43 x 44 mm (7.76 x 5.33 x 1.73 in)
Weight NPort 5610-8-DTL Series: 1760 g (3.88 lb)
NPort 5650-8-DTL Series: 1770 g (3.90 lb)
NPort 5650I-8-DTL Series: 1850 g (4.08 lb)
Installation Desktop, DIN-rail mounting (with optional kit), Wall mounting (with optional kit)
Environmental Limits
Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Standard and Cerifications
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
Safety UL 60950-1
Declaration
Green Product RoHS, CRoHS, WEEE
MTBF
Time NPort 5610-8-DTL Series: 953,388 hrs
NPort 5650-8-DTL Series: 740,457 hrs
NPort 5650I-8-DTL Series: 258,150 hrs
Standards Telcordia (Bellcore) Standard TR/SR
Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty