ioMirror E3200 Series

Features and Benefits

  • Direct input-to-output signal communication over IP
  • High-speed peer-to-peer I/O within 20 ms
  • One physical alarm port for connectivity status
  • Utility for quick and easy web-based settings
  • Local alarm channel
  • Remote alarm message
  • Supports Modbus TCP for remote monitoring
  • Optional LCD module for easy configuration


Download Datasheet


The ioMirror E3200 Series, which is designed as a cable-replacement solution to connect remote digital input signals to output signals over an IP network, provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3200 Series device, or can be sent to a local PLC or DCS controller. Over a local area network, the ioMirror can achieve a low signal latency (typically less than 20 ms). With the ioMirror, remote sensors can be connected to local controllers or display panels over copper, fiber, or wireless Ethernet infrastructures, and signals can be transmitted over virtually unlimited distances, without noise problems.

Split Sensor Signals to 16 Different Locations

The ioMirror E3200 Series can split one input signal to two digital output channels at two different IP addresses. Eight tank level signals can be monitored at 16 different display panels, all at the same time.

Local Alarm and Remote Alarm Messages for Monitoring Connectivity

The ioMirror E3200 Series has a 24 VDC alarm output channel that can activate an attached buzzer or LED display when the connection fails. In addition, both ioMirror modules can send messages to the ioEventLog software, ensuring that at least one of the warning messages will reach the ioEventLog software.


Input/Output Interface
Digital Input Channels 8
Digital Output Channels 8
Alarm Contact Channels 1
Isolation 3k VDC or 2k Vrms
Buttons Reset button
Digital Inputs
Connector Screw-fastened Euroblock terminal
Digital Filtering Time Interval Software configurable
Dry Contact On: short to GND
Off: open
I/O Mode DI
Over-Voltage Protection 36 VDC
Points per COM 8 channels
Sensor Type Dry contact
Wet Contact (NPN)
Wet Contact (DI to GND) On: 0 to 3 VDC
Off: 10 to 30 VDC
Digital Outputs
Connector Screw-fastened Euroblock terminal
Current Rating 200 mA per channel
I/O Mode DO
I/O Type Sink
Over-Current Protection 0.65 A per channel @ 25°C
Over-Temperature Shutdown 160°C (min.)
Over-Voltage Protection 35 VDC
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector) 1
Magnetic Isolation Protection 1.5 kV (built-in)
Ethernet Software Features
Configuration Options Web Console (HTTP)
Windows Utility (ioMirrorAdmin)
Industrial Protocols Modbus TCP Server (Slave)
Management BOOTP
DHCP Client
Time Management SNTP
Modbus TCP
Functions Supported 1, 2, 3, 4, 5, 6, 15, 16
LED Interface
LED Indicators PWR, Ready
Power Parameters
Power Connector Screw-fastened Euroblock terminal
No. of Power Inputs 1
Input Voltage 12 to 48 VDC
Power Consumption 136 mA @ 24 VDC
Alarm Contacts
I/O Type Sink
Current Rating Max. 200 mA per channel
Connector Screw-fastened Euroblock terminal
Physical Characteristics
Housing Plastic
Dimensions 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight 250 g (0.55 lb)
Installation Wall mounting
DIN-rail mounting
Wiring I/O cable, 16 to 26 AWG
Power cable, 16 to 26 AWG
Environmental Limits
Operating Temperature -10 to 60°C (14 to 140°F)
Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude 2000 m
Note: Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
Freefall IEC 60068-2-32
Safety UL 508
EMI EN 61000-6-4, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
Time 231,020 hrs
Standards Telcordia SR332
Warranty Period
Details 5 years