ioLogik E2200 Series

Features and Benefits

  • Front-end intelligence with patented Click&Go control logic, up to 24 rules
  • Active communication with MX-AOPC UA Server
  • Saves time and wiring costs with peer-to-peer communications
  • Supports SNMP v1/v2c/v3
  • Friendly configuration via web browser
  • Simplifies I/O management with MXIO library for Windows or Linux
  • Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments


Download Datasheet


Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.

PC-Free Alarm and Control Intelligence

This device supports simple yet powerful Click&Go™ technology to configure event-driven reports and alarms delivered over email, TCP/UDP, or SNMP traps, giving you a powerful and effective tool for delivering timestamped status updates in real time.

With built-in Click&Go™ intelligence, this device can be configured for simple outputs paired up with simple input triggers without the need for a PC controller. This allows it to be configured to automatically report I/O events according to conditions specified by the user.

SNMP for Ethernet Device Management

By using SNMP, IT engineers can configure the device to deliver alarms (traps) for specific I/O events, or use it to read or write directly to the I/O registers. For the strongest security, the device features SNMPv3, with authentication and encryption. With Moxa’s SNMP-capable I/O, even IT professionals can easily integrate industrial sensors and servos over an Ethernet backbone, and with its strong network management tools, it is ideal for a wide variety of industrial applications, including environmental monitoring, telecommunications, power production and delivery, and transportation.

Push Technology for Events and Alarms

When used with MX-AOPC UA Server, devices can use active push communications when communicating changes in state and/or events to a SCADA system. Unlike a polling system, when using a push architecture for communications with a SCADA system, messages will only be delivered when changes in state or configured events occur, resulting in higher accuracy and lower amounts of data that need to be transferred.


Control Logic
Language Click&Go
Input/Output Interface
Analog Input Channels ioLogik E2240 Series: 8
ioLogik E2242 Series: 4
Analog Output Channels ioLogik E2240 Series: 2
Configurable DIO Channels (by software) ioLogik E2212 Series: 4
ioLogik E2242 Series: 12
Digital Input Channels ioLogik E2210 Series: 12
ioLogik E2212 Series: 8
ioLogik E2214 Series: 6
Digital Output Channels ioLogik E2210/E2212 Series: 8
ioLogik E2260/E2262 Series: 4
Relay Channels ioLogik E2214 Series: 6
RTD Channels ioLogik E2260 Series: 6
Thermocouple Channels ioLogik E2262 Series: 8
Buttons Reset button
Isolation 3k VDC or 2k Vrms
Rotary Switch 0 to 9
Digital Inputs
Connector Screw-fastened Euroblock terminal
Counter Frequency 900 Hz
Digital Filtering Time Interval Software configurable
Dry Contact On: short to GND
Off: open
I/O Mode DI or event counter
Points per COM ioLogik E2210 Series: 12 channels
ioLogik E2212/E2242 Series: 6 channels
ioLogik E2214 Series: 3 channels
Sensor Type ioLogik E2210 Series: Dry Contact and Wet Contact (NPN)
ioLogik E2212/E2214/E2242 Series: Dry Contact and Wet Contact (NPN or PNP)
Wet Contact (DI to GND) On: 0 to 3 VDC
Off: 10 to 30 VDC
Digital Outputs
Connector Screw-fastened Euroblock terminal
Current Rating 200 mA per channel
I/O Mode DO or pulse output
I/O Type Sink
Over-Current Protection 0.65 A per channel @ 25°C
Over-Temperature Shutdown 175°C (min.)
Over-Voltage Protection 45 VDC (typical)
Pulse Output Frequency 1 kHz
DIO Output Leakage Current 4.0 mA @ 24 VDC
Connector Screw-fastened Euroblock terminal
Contact Current Rating Inductive load: 2 A @ 30 VDC, 250 VAC, 110 VAC
Resistive load: 5 A @ 30 VDC, 250 VAC, 110 VAC
Contact Resistance 100 milli-ohms (max.)
Electrical Endurance 100,000 operations @ 5 A resistive load
Mechanical Endurance 1,000,000 operations
Minimum Permitted Load 1 A @ 5 VDC
Pulse Output Frequency 0.3 Hz at rated load
Type Form A (N.O.) power relay
I/O Mode Relay or pulse output
Note Ambient humidity must be non-condensing and remain between 5 and 95%. The relays may malfunction when operating in high condensation environments below 0°C.
Analog Inputs
Accuracy ioLogik E2240/E2242:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik E2240-T/E2242-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
Connector Screw-fastened Euroblock terminal
I/O Mode Voltage/Current
I/O Type Differential
Input Impedance ioLogik E2240 Series: 900 kilo-ohms (min.)
ioLogik E2242 Series: 200 kilo-ohms (min.)
Input Range ioLogik E2240 Series: ±150 mV, ±500 mV, ±5 V, ±10 V, 0 to 20 mA, 4 to 20 mA
ioLogik E2242 Series: ±150 mV, 0 to 150 mV, ±500 mV, 0 to 500 mV, ±5 V, 0 to 5 V, ±10 V, 0 to 10 V, 0 to 20 mA, 4 to 20 mA
Resolution 16 bits
Sampling Rate ioLogik E2240 Series:
All Channels: 10 samples/sec for voltage; 6 samples/sec for current
Per Channel: 1.25 samples/sec for voltage; 0.75 samples/sec for current
Single channel: 1.25 samples/sec for voltage; 0.75 samples/sec for current
ioLogik E2242 Series:
All channels: 32 samples/sec
Per channel: 8 samples/sec
Single channel: 100 samples/sec
Built-in Resistor for Current Input 120 ohms
Over-Voltage Protection -25 to +30 VDC (power on)
-35 to +35 VDC (power off)
Analog Outputs
Accuracy ioLogik E2240:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik E2240-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
Output Range 0 to 10 VDC
4 to 20 mA
Resolution 12-bit
Load (Current Mode) Internal power: 250 ohms (max.)
Accuracy ioLogik E2260:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik E2260-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
Connector Screw-fastened Euroblock terminal
Input Connection 2- or 3-wire
Input Impedance 625 kilo-ohms (min.)
Sensor Type JPT100, JPT200, JPT500 (-200 to 640°C)
JPT1000 (-200 to 350°C)
NI100, NI200, NI500 (-60 to 250°C)
NI1000 (-60 to 150°C)
NI120 (-80 to 260°C)
PT1000 (-200 to 350°C)
PT50, PT100, PT200, PT500 (-200 to 850°C)
Resistance of 310, 620, 1250, and 2200 ohms
Resolution 0.1°C or 0.1 ohms
Sampling Rate All channels: 12 samples/sec
Per channel: 2 samples/sec
Millivolt Accuracy ioLogik E2262:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik E2262-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
TC Accuracy Types J, T, E, S, B: ±5°C
Types K, R, N: ±8°C
CJC Accuracy ±0.5°C @ 25°C
±1.5°C @ -40 to 75°C
Connector Screw-fastened Euroblock terminal
Input Impedance 1 mega-ohms (min.)
Millivolt Type ±19.532 mV
±39.062 mV
±78.126 mV
Fault and over-voltage protection: -35 to +35 VDC (power off); -25 to +30 VDC (power on)
Resolution 16 bits
Sampling Rate All channels: 12 samples/sec
Per channel: 1.5 samples/sec
Sensor Type J, K, T, E, R, S, B, N
LED Interface
LED Indicators PWR, RDY, Serial, I/O Status
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector) 1
Magnetic Isolation Protection 1.5 kV (built-in)
Ethernet Software Features
Configuration Options Web Console (HTTP), Windows Utility (ioAdmin)
Industrial Protocols CGI commands, Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library, SNMPv1 Trap, SNMPv1/v2c/v3
Management BOOTP, IPv4, SMTP, DHCP Client, HTTP, TCP/IP
MIB Device Settings MIB
Time Management SNTP
Modbus TCP
Functions Supported 1, 2, 3, 4, 5, 6, 15, 16
Mode Server (Slave)
Serial Interface
Connector Terminal block
Serial Standards RS-485
No. of Ports 1
Baudrate 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Parity None
Data Bits 8
Stop Bits 1
Flow Control None
Serial Signals
RS-485-2w Data+, Data-, GND
Serial Software Features
Industrial Protocols Modbus RTU Server (Client)
Power Parameters
Power Connector Screw-fastened Euroblock terminal
No. of Power Inputs 1
Input Voltage 12 to 36 VDC
Power Consumption ioLogik E2210 Series: 202 mA @ 24 VDC
ioLogik E2212 Series: 136 mA @ 24 VDC
ioLogik E2214 Series: 170 mA @ 24 VDC
ioLogik E2240 Series: 198 mA @ 24 VDC
ioLogik E2242 Series: 178 mA @ 24 VDC
ioLogik E2260 Series: 95 mA @ 24 VDC
ioLogik E2262 Series: 160 mA @ 24 VDC
Physical Characteristics
Dimensions 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight 250 g (0.55 lb)
Installation DIN-rail mounting, Wall mounting
Wiring I/O cable, 16 to 26 AWG
Power cable, 16 to 26 AWG
Housing Plastic
Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude 2000 m
Standards and Certifications
Freefall IEC 60068-2-32
EMC EN 61000-6-2/-6-4
Safety UL 508
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
Green Product RoHS, CRoHS, WEEE
Time ioLogik E2210 Series: 213,673 hrs
ioLogik E2212 Series: 217,722 hrs
ioLogik E2214 Series: 307,329 hrs
ioLogik E2240 Series: 155,941 hrs
ioLogik E2242 Series: 204,391 hrs
ioLogik E2260 Series: 327,282 hrs
ioLogik E2262 Series: 341,063 hrs
Standards Telcordia SR332
Warranty Period ioLogik E2214 Series: 2 years
ioLogik E2210/E2212/E2240/E2242/E2260/E2262 Series: 5 years
Details See