ioLogik 2500 Series

Features and Benefits

  • Front-end intelligence with Click&Go Plus control logic, up to 48 rules
  • Active communication with MX-AOPC UA Server
  • Automatically complement disconnection period data with MX-AOPC UA Logger software
  • 4-port unmanaged switch built in for linking to Ethernet devices
  • I/O expansion port for daisy chaining up to 8 ioLogik E1200 units
  • 3-in-1 serial port: RS-232, RS-422, or RS-485
  • Supports SNMP v1/v2c/v3
  • Simplifies I/O management with MXIO library for Windows or Linux
  • Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments

Certifications

Download Datasheet

Introduction

ioLogik 2500 smart Ethernet remote I/O devices feature unique hardware and software designs, making them ideal solutions for a variety of industrial data acquisition applications. The ioLogik 2500’s hardware design includes a 4-port unmanaged Ethernet switch and 2 serial ports, enabling it to seamlessly connect to a variety of field devices.

One of the Ethernet ports can be used to link to 8 daisy-chained ioLogik E1200 expansion modules to provide more than 100 channels. The ioLogik 2500 acts as the “head” unit, with Click&Go Plus logic used to control the entire I/O array. Most importantly, a single IP is all that is required to connect the entire I/O array to your network, providing the perfect solution for industrial field sites that have an insufficient number of IP addresses.

Programming-Free Click&Go Plus™ Logic

Click&Go Plus™ control logic supports up to 48 rules and 8 conditions/actions. In addition, its graphical user interface provides 3 logic gates and 3 multi-layers, helping you build more powerful and efficient IO solutions. Once you finish setting up your Click&Go Plus™ logic rules, IOxpress’s easy-to-use simulation function can be used to find potential errors in your Click&Go Plus™ rules before uploading them to your online devices.

Multi-Protocol Data Concentrator

By supporting multiple protocols, the ioLogik 2500 improves the efficiency of collecting field-site data and then sending it to upper-level systems. For field-site data collection, an ioLogik 2500 can collect data from other third-party devices via both Modbus TCP and Modbus RTU, and also lets you link up to 8 ioLogik E1200 modules to create a versatile I/O array with over 100 different I/O channels, allowing all field-site data to be accessed by upper-level systems. For the upper-level systems, the ioLogik 2500 supports Modbus TCP, SNMP, SNMP Trap, RESTful API, Active OPC tag, and C++ library for easy integration with various IT/OT systems, making the ioLogik 2500 the perfect data concentrator for connecting field sites to your network.

Data Completeness with Local Storage Data Logging

The ioLogik 2500 supports microSD cards, turning it into a powerful data logger for storing valuable data. Important data from field sites can be accessed remotely by different systems via an FTP, and the ioLogik’s data completeness function enables real-time monitoring of data through MX-AOPC UA Suite when the network goes down unexpectedly.

Remote Access Cellular I/O via Cellular Network

Most carriers provide dynamic and private IP address SIM cards, and although private IP cards are cheaper, they cannot be used to provide direct access to the cloud. Moxa’s Cellular Data Access software enables this type of connection by establishing a special data route between the cellular models and the cloud.

Only one public IP address is needed to use Moxa’s Cellular Data Access software, allowing you to easily update internal register values, change output channel status, and modify the configurations of devices connected to the device, all through the cloud.

Specifications

Memory
microSD Slot Up to 32 GB (SD 2.0 compatible)
Note: For units operating in extreme temperatures, industrial-grade, wide-temperature microSD cards are required.
Control Logic
Language Click&Go Plus
Input/Output Interface
Analog Input Channels ioLogik 2542 Series: 4
Configurable DIO Channels (by software) ioLogik 2512 Series: 8
ioLogik 2542 Series: 12
Digital Input Channels ioLogik 2512 Series: 8
Buttons Reset button
Isolation 3k VDC or 2k Vrms
Digital Inputs
Connector Screw-fastened Euroblock terminal
Counter Frequency 900 Hz
Digital Filtering Time Interval Software configurable
Dry Contact On: short to GND
Off: open
I/O Mode DI or event counter
Points per COM ioLogik 2512 Series: 8 channels
ioLogik 2542 Series: 6 channels
Sensor Type Dry contact
Wet contact (NPN or PNP)
Wet Contact (DI to GND) On: 10 to 30 VDC
Off: 0 to 3 VDC
Digital Outputs
Connector Screw-fastened Euroblock terminal
Current Rating 500 mA per channel
I/O Mode DO or pulse output
I/O Type Sink
Over-Current Protection 1.5 A per channel @ 25°C
Over-Temperature Shutdown 175°C (typical), 150°C (min.)
Over-Voltage Protection 45 VDC (typical)
Pulse Output Frequency 5 kHz (max.)
DIO Output Leakage Current < 1 mA @ 30 VDC
Analog Inputs
Accuracy ioLogik 2542 Series (except -T models):
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik 2542-T
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
ioLogik 2542 HSPA-T/WL1-EU-T/WL1-JP-T/WL1-US-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -30 to 70°C
±0.5% FSR @ -30 to 70°C
Connector Screw-fastened Euroblock terminal
I/O Mode Voltage/Current
I/O Type Differential
Input Impedance 1 mega-ohms (min.)
Input Range ±10 VDC
0 to 10 VDC
0 to 20 mA
4 to 20 mA
4 to 20 mA (with burn-out detection)
Resolution 16 bits
Sampling Rate All channels: 400 samples/sec
Per channel: 100 samples/sec
Built-in Resistor for Current Input 120 ohms
Over-Voltage Protection -25 to +30 VDC (power on)
-35 to +35 VDC (power off)
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector) 4, 1 MAC address (Ethernet bypass)
Magnetic Isolation Protection 1.5 kV (built-in)
Ethernet Software Features
Configuration Options Web Console (HTTP/HTTPS), Windows Utility (IOxpress)
Industrial Protocols CGI commands, Modbus TCP Client (Master), Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library, RESTful API, SNMPv1/v2c/v3, SNMPv1/v2c Trap
Management ioLogik 2500 Series -HSPA/Ethernet models: BOOTP, IPv4, SMTP, TCP/IP, DHCP Client
ioLogik 2500 Series -WL1 models: BOOTP, IPv4, SMTP, TCP/IP
MIB Device Settings MIB
Security HTTPS/SSL
Time Management SNTP
LED Interface
LED Indicators ioLogik 2512/2542 Series: PWR, RDY, Serial port (P1, P2), Ethernet port (L1 to L4), I/O Channel Status (0 to 15)
ioLogik 2500 Series -HSPA/-WL1 models: PWR, RDY, Serial port (P1, P2), Ethernet port (L1 to L4), I/O Channel Status (0 to 15), Wireless connection, Signal Status
Serial Interface
Connector 8-pin RJ45
Serial Standards RS-232, RS-422, RS-485
No. of Ports 2
Baudrate 300 bps to 115.2 kbps
Parity None, Even, Odd
Stop Bits 1, 2
Flow Control None, RTS/CTS, XON/XOFF
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
Serial Software Features
Industrial Protocols Modbus RTU Client (Master)
Cellular Interface
Cellular Standards GSM, EDGE, GPRS, UMTS, HSPA
Band Options ioLogik 2500 Series -HSPA models: UMTS/HSPA+ 800/850/900/1900/2100 MHz
ioLogik 2500 Series -HSPA models: Universal quad-band GSM/GPRS/EDGE 850/900/1800/1900 MHz
SIM Control Voltage 1.8 V, 3 V
SIM Format Mini SIM
Cellular Antenna Connectors ioLogik 2500 Series -HSPA models: 1 SMA female
Security Functions
IPsec VPN ioLogik 2500 Series -HSPA models: DES, 3DES, AES-128, AES-192, AES-256
WLAN Interface
WLAN Standards 802.11b/g
802.11i Wireless Security
Modulation Type DSSS
OFDM
Frequency Band for US (20 MHz operating channels) 2.412 to 2.462 GHz (11 channels)
Frequency Band for EU (20 MHz operating channels) 2.412 to 2.472 GHz (13 channels)
Frequency Band for JP (20 MHz operating channels) 2.412 to 2.484 GHz (14 channels)
Wireless Security WEP encryption (64-bit and 128-bit)
WPA/WPA2-Personal
Transmission Rate 802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
Transmitter Power for 802.11b 18±1.5 dBm @ 1 to 11 Mbps
Transmitter Power for 802.11g 18±1.5 dBm @ 6 to 24 Mbps
17±1.5 dBm @ 36 Mbps
16±1.5 dBm @ 48 Mbps
16±1.5 dBm @ 54 Mbps
Receiver Sensitivity for 802.11b (measured at 2.437 GHz) Typ. -97 dBm @ 1 Mbps
Typ. -94 dBm @ 2 Mbps
Typ. -92 dBm @ 5.5 Mbps
Typ. -90 dBm @ 11 Mbps
Receiver Sensitivity for 802.11g (measured at 2.437 GHz) Typ. -88 dBm @ 6 to 24 Mbps
Typ. -85 dBm @ 36 Mbps
Typ. -75 dBm @ 48 Mbps
Typ. -70 dBm @ 54 Mbps
WLAN Antenna Connector ioLogik 2512-WL1/2542-WL1 Series: 1 RP-SMA male
Power Parameters
Power Connector Screw-fastened Euroblock terminal
No. of Power Inputs 1
Input Voltage 12 to 48 VDC
Power Consumption ioLogik 2512 Series: 254 mA @ 24 VDC, 529 mA @ 12 VDC, 133 mA @ 48VDC
ioLogik 2512-HSPA Series: 352 mA @ 24 VDC, 728 mA @ 12 VDC, 187 mA @ 48 VDC
ioLogik 2512-WL1 Series: 354 mA @ 24 VDC, 735 mA @ 12 VDC, 189 mA @ 48 VDC
ioLogik 2542 Series: 281 mA @ 24 VDC, 589 mA @ 12 VDC, 144 mA @ 48 VDC
ioLogik 2542-HSPA Series: 311 mA @ 24 VDC, 649 mA @ 12 VDC, 166 mA @ 48 VDC
ioLogik 2542-WL1 Series: 380 mA @ 24 VDC, 797 mA @ 12 VDC, 203 mA @ 48 VDC
Physical Characteristics
Dimensions 61 x 157 x 115 mm (2.4 x 6.18 x 4.53 in)
Weight 1,265 g (2.79 lb)
Installation DIN-rail mounting, Wall mounting (with optional kit)
Wiring I/O cable, 16 to 26 AWG
Power cable, 12 to 24 AWG
Housing Metal
Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
HSPA/WL1 -T models: -30 to 70°C (-22 to 158°F)
ioLogik 2512-T/2542-T: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude 2000 m
Standards and Certifications
EMC EN 61000-6-2/-6-4
Safety UL 508
EMI CISPR 32, FCC Part 15B Class A
EMS All models:
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8
ioLogik 2500 Series:
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-5 Surge: Power: 1 kV
ioLogik 2500 Series -HSPA/-WL1 models:
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-5 Surge: Power: 2 kV
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
Freefall IEC 60068-2-32
Hazardous Locations ATEX, Class I Division 2
Radio EN 301 489-1/17, NCC (-WL models)
Radio Frequency EN 301 908, EN 301 489-24, EN 301 511
WLAN Standards EN 300328
EN 301893
Declaration
Green Product RoHS, CRoHS, WEEE
MTBF
Time ioLogik 2512 Series: 467,032 hrs
ioLogik 2542 Series: 375,439 hrs
ioLogik 2512-HSPA Series: 378,154 hrs
ioLogik 2542-HSPA Series: 378,154 hrs
ioLogik 2512-WL1 Series: 400,469 hrs
ioLogik 2542-WL1 Series: 331,222 hrs
Standards Telcordia SR332
Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty