CP-118E-A-I/138E-A-I Series

Features and Benefits

  • PCI Express 1.0 compliant
  • 921.6 kbps maximum baudrate for fast data transmission
  • 128-byte FIFO and on-chip S/W flow control
  • Variety of connection cables and boxes available for RS-232/422/485
  • Drivers provided for a broad selection of operating systems, including Windows, Linux, and UNIX
  • Easy maintenance with built-in LEDs and management software

Certifications

Download Datasheet

Introduction

The CP-118E-A-I and CP-138E-A-I are smart PCI Express multiport serial boards designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-118E-A-I and CP-138E-A-I are compatible with all popular operating systems, and each of their eight serial ports supports data rates of up to 921.6 kbps and provide full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-118E-A-I and CP-138E-A-I work with PCI Express x1, allowing the boards to be installed in any PCI Express slot.

Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending)

Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s Intelligent RS-485 technology supports two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.

Specifications

Serial Interface
Comm. Controller 16C550C compatible
Baudrate 50 bps to 921.6 kbps (supports non-standard baudrates)
Bus PCI Express 1.0
Connector DB78 female
FIFO 128 bytes
Flow Control CP-118E-A-I w/o cable: None, RTS/CTS, XON/XOFF
CP-138E-A-I w/o cable: None, XON/XOFF
Max. No. of Boards per PC 8
No. of Ports 8
Parity None, Even, Odd, Space, Mark
Serial Standards CP-118E-A-I w/o cable: RS-232, RS-422, RS-485
CP-138E-A-I w/o cable: RS-422, RS-485
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Isolation 2 kV
Surge 4 kV
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
DIP Switch Configuration
Serial Interface CP-118E-A-I w/o cable: RS-232/422/485
CP-138E-A-I w/o cable: RS-422/485
Serial Software Features
Windows Drivers DOS, Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Linux Drivers Linux kernel 2.4.x, Linux kernel 2.6.x, Linux kernel 3.x, Linux kernel 4.x, Linux kernel 5.x
UNIX Drivers Solaris 10, UnixWare 7, SCO OpenServer 5, SCO OpenServer 6
Power Parameters
Input Current 2,356 mA @ 3.3 VDC
Physical Characteristics
Dimensions 107 x 136.9 mm (4.21 x 5.39 in)
Weight 139.7 g (0.31 lb)
LED Interface
LED Indicators Built-in Tx, Rx LEDs for each port
Environmental Limits
Operating Temperature 0 to 55°C (32 to 131°F)
Storage Temperature (package included) -20 to 85°C (-4 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Standard and Cerifications
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class B
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
Declaration
Green Product RoHS, CRoHS, WEEE
MTBF
Time 390,883 hrs
221,331 hrs
Standards Telcordia (Bellcore) Standard TR/SR
Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty